PCR Workstations

Product Details:

In any research centers,laboratories pharma companies it is important that the magnitude of the risk involved in your particular area procedures and operations be carefully examined and evaluated to ensure that the level of protection offered by PCR cabinet is both sufficient and satisfactory. The plug and perform PCR still air work station is used for enclosed sample handling and PCR reagent preparation.

Features:

• Unique-body design – no joints or gaps in construction.
• Full Access Folding Sash of Polycarbonate to reflect UV energy
• Base of the unit in Grey colored single cast, chemically resistant 10 mm polypropylene cylindrical/ oval designed base for easy cleaning and will prevent any contaminants in corners
• Top of the unit will be Chemically resistant, 6 mm or suitable thick, cast clear modified acrylic top, which will perfectly fitted /fix on cylindrical base work area.
• The acrylic top will have fine, smooth cut window to access inner chamber and work area for operations and preparation.
• Mini-pleat Anti-microbial HEPA filters of EU-14 grade with an efficiency of 99.99% on mono-disperse, 0.3 micron challenge at remote location in aluminum frames.
• High efficiency motor blower with variable speed controller will be provided.
• Air velocity can be adjusted due to the same
• The unit will be with fitted germicidal UV-C lamp (254 nm) and its wiring and switch for operation.
• UV tube light of 254 nm to disinfect the interior work area of the cabinet with user set digital timer
• A display with alarm to constantly monitor alert effectiveness of the short wave UV bulb life
• Digital UV light timer (0-59 min) to detect the usage of the UV light
• The digital timer can be easily set by the user as per the convenience
• The unit is with fitted LED 25 W lamp and its wiring and switch for operation
• Interlocking between UV light front door which means during operation if the front door is opened then the UV light will get “OFF” when the front door is completely closed that time only the UV light will get “ON”
• The system will be pre validated and tested,
• Microprocessor controller LCD display with soft touch ON/OFF switches
• Digital Pressure monitor to detect pressure across HEPA filter will be provided also a special alarm will be provided along with sensor to detect the High low pressure issue, damages in filters, filter replacement etc
• Noise Level : < 55db

Additional Information:

• Item Code: KIM-PCR-01-5A